UNISOFT putty suitable for a very wide range of use. Applied in thick layers it is excellent for filling large cavities. It produces a soft surface, suitable both for manual and machine sanding. It has very good adhesion to various substrates, including galvanized steel. It is highly elastic, which minimises the risk of cracking, even when applied on large surfaces. Rapid curing reduces the time of repair.
FIBER glass fibre reinforced putty. Thanks to a large quantity of long fibres the product has a very high mechanical strength and good filling properties. Its low flexibility and hard sanding limits its application to small surfaces.
FIBER MICRO glass fibre reinforced putty. Thanks to flexible polyester resins and short fibres it has higher elasticity than FIBER, maintaining high mechanical strength. Soft and easy sanding make it suitable for application even on large surfaces. It has good adhesion to various substrates, including galvanized steel.
SOFT PLUS multifunctional, the most universal polyester putty in our range of products. It combines the features of filling putties (good adhesion to various substrates, repair of large surface damages, easy application and sanding with coarse grain sandpaper) with the features of finishing putties (easy application in thin layers, filling of small defects, sanding with fine grain sandpaper). After application it forms a very smooth surface, which reduces time of sanding.
MULTILIGHT is a multifunctional polyester putty for filling and finishing. Thanks to the special fillers it contains, the product's density is about 40% lower when compared with conventional putties. Additional features of the putty are its smooth surface after application, high surface dryness and superb treatment.
ALU putty containing aluminium powder. It improves thermal resistance and provides excellent adhesion comparable with PROFICYNK. Its reduced shrinkage, as compared to typical putties accompanied by high elasticity makes this product suitable for repairing large areas.
PROFISOFT is multifunctional git for a very wide range of use. It is very easy to apply on large surfaces in combination with fine git. Resistant to shooting. More coatings are recommended for applying a thick layer.
FINISH finishing putty for knifing application. It is used for repairing small surfaces and final smoothing of surface before application of fillers. Fine grain fillers make it an excellent material for thin-coat application and filling of small holes and scratches. It may be sanded with fine grade sandpaper to obtain a very smooth surface. It also has a very good adhesion to various substrates, including galvanized steel.
1K one-component acrylic putty is a finishing putty. Its main purpose is to fill very small scratches and surface defects directly before coating. The product is coatable with all acrylic and base products. Hence it must be applied in very thin layers and left for the solvent to flash off between the successive putty layers and sanded with the same abrasive papers as acrylic fillers.
BUMPER FIX putty for plastics. It has very high flexibility and excellent adhesion to most plastics (except for polyethylene and teflon). Satisfactory adhesion to polypropylene allows application of the product on non-primed substrates.
COBRA Truck Bedliner
COBRA Truck Bedliner - 2K polyurethane resin-based textured protective coat. Extreme mechanical strength, scratch and solvent resistance. Protects against adverse weather conditions, petrol, oil, water and salt. Sound-proofing and sound-dampening properties. Anti-slip finish.
GRAVIT 600 ANTIGRAVER
GRAVIT 600 is onecomponent product based on synthetic resins. It forms durable, elastic layer resistant to damage by stones. It protects against corrosion, petrol, oil, water and salt. It does not contain any asphalt or bitumen. It can be coated with various topcoats. It absorbs sounds and vibration. Antigravel GRAVIT 600 is available also in spray version.
GRAVIT 620 is one-component product which hardens in room temperature by evaporation of thinners. It forms a durable and very elastic seal. It doesn’t flow down, doesn’t leave any scratches and guarantees optimum adhesion to untreated and painted steel sheets. After drying can be painted with any acrylic lacquers. Should be applied with stiff brush.
GRAVIT 630 is one-component, fast hardening product. As a result of chemical reaction with the air moisture it forms a tough and elastic coating. Thanks to thixotropic consistence it doesn’t flow down even in thick layer. It also has a low shrinkage and doesn’t crack. High elasticity and endurance enable using it to eliminate vibrations and strengthen the car structure. Sealer shows excellent adhesion both to untreated and painted steel sheets and it also can be painted with any acrylic products. It is resistant to water and weathering. The only exception is lower tolerance for UV light.
GRAVIT 640 - is one component wax-lanoline product drying in a room temperature by evaporation of thinner. It perfectly protects against corrosion. It penetrates very good, forms flexible coating protecting against water and salt. It has good abilities to remove moisture from the substrate. GRAVIT 640 is available also in spray.
GRAVIT 660 BITUMEN UNDERBODY COATING: the product creates a strong, elastic layer with sound-proofing qualities and anti-gravel strength. The product provides weather protection of the underbody in passenger vehicles, buses and coaches, construction machines and trucks. The product is resistant to water, salt, acids and bases, providing a coating with good insulating performance. It is easy to apply and does not run. Gravit 660 cannot be coated with other paint coats.
PLUS 700 is a 1K product for increasing adhesion of polyurethane and acrylic pro ducts to various surfaces, mostly for plastics (also for polypropylene and its copolymers). It is also supplied in aerosol package PLUS 700 SPRAY.
PLUS 710 repair box which consist of polyester resin, hardener and glass fibre mat. It forms rigid laminate with a very good mechanical strength and it may be used for repairing large damages (e.g. caused by corrosion). It can be used for repairing metal or plastic surfaces. When cured, it may be sanded and coated with any polyester putties, to achieve enough smooth surface.
PLUS 720 is a product for manual application. It contains unsaturated poly ester resin with suitable catalysts. The 50% paste of benzoyl peroxide should be used as hardener (Novol Art. No. 5022). Polyester Resin is suitable for repairing holes and rust damages in car bodies, as well as for laminating yachts, boats and caravans. Obtained coat has an excellent adhesion to the substrate. It is the same material as in the repair box but it is supplied in bigger containers. Compatible with any type of glass fibre mat or woven roving. PLUS 730 Intended for laminating with polyester resin. Several sizes varying in thickness (gram per square metre) are offered. Glass mat guarantees an even reinforcement of the lamination in all directions.
PLUS 750 is a product significantly short ening the drying and hardening time of two-component acrylic and polyurethane products. It is recommended to use espe cially in low temperature and high air humidity. In NOVAKRYL acrylic clearcoats identical effects are achieved while applying fast hardeners.
PLUS 760 is designed to prevent the formation of the silicone craters (fish eyes) which can occur as a result of silicone and grease remaining residue.
PLUS 770 is a plasticizer for acrylic and poly urethane products designed mainly for application on to car body parts made of plastics. It prevents cracking and chipping of the fillers and topcoats on elastify, defor ming elements. It may be used to elasticity of topcoats on elements exposed to damage by stones (e.g. front part, bonnet).
PLUS 780 - mixture of organic solvents which allows a fast and thorough cleaning of the surface from different contaminations, also from greases, oils, silicones etc.
FLASH 900 - structure topcoat. Onecomponent thermoplastic product applied with a spray gun or in aerosol dispenser. It is fast drying product with very good hiding power. FLASH 900 is characterized with special texture surface which simulates plastic. It is also available in aerosol.
FLASH 910 acryl topcoat is a onecomponent thermoplastic product for application with a spray gun, it is also supplied in aerosol package. FLASH 910 is fast drying product. It covers precisely but doesn't guarantee so high stability like 2-component topcoats.
THIN 850 is a mixture of solvents giving a product applied for thinning all fillers and acrylic lacquers. It occurs in three versions: fast, standard and slow, which allow to use appropriate thinner depending on temperature of work and size of repair.
THIN 870 is universal thinner for basecoats. It occurs in three versions: fast, standard and slow, which allow to use appropriate thinner depending on temperature of work and size of repair.
THIN 890 is a special thinner designed for eliminating optical colour differences between old and new applied coating. Can be used both for clear-and top-coats.
UBS Antigravel is one-component product based on synthetic resins. It forms durable, elastic layer resistant to damage by stones. It protects against corrosion, petrol, oil, water and salt. It does not contain any asphalt or bitumen. It can be coated with various topcoats. It also absorbs sounds and vibration.
ACRYLIC CLEARCOAT Anti Scretch
KLARLACK 400 is an acrylic clearcoat with scratch resistant (SR) properties. It has a good flowability and a short drying time. KLARLACK 400 gives a high-gloss coating with a high final hardness. The product is compatible with most of commercial thinner and water-borne basecoats. It is UV and weather resistant.
PROTECT 310 it is a two-component acryl filler for application with a spray gun. It is strong filled primer based on acrylic resin. Thanks to its high spraying viscosity it may be applied in very thick layers, perfectly filling even large scratches and surface irregu larities. It has very good adhesion to various substrates. Thanks to high quality resins and special additives it provides good anticorrosion pro tection and insulation between poly ester materials (putties) and acrylic paints. By mixing white with black colours any shades of gray may be obtained to match the topcoat colour.
Fast acrylic resin filler. Has a significantly lower tendency to stick to sandpaper, especially during power sanding. At the selected spraying viscosity, the product can be applied in smooth layers which perfectly fill even relatively large scratches and surface irregularities. The product has excellent adhesion to various substrates. The acrylic filler features high quality resins and special additives to ensure good anti-corrosion protection and isolation of polyester materials (fillers) from acrylic topcoats.
PROTECT 330 is acryl filler, which thanks to applying high quality resins and special additives provides good anti orrosion protection and insulation between polyester materials (putties) and acrylic paints. Protect 330 has very good adhesion to various substrates. Primer is in three colors: black, white and grey. By mixing these three colours in proper ratio, it is obtained primer providing the best hide power for enamel.
PROTECT 340 is reactive anticorrosion polyvinyl resin based primer. It has excellent adhesion to various substrates and guarantees a very high corrosion resistance, also in the case of damage coating (scratches, chipping). It is applied in very thin layers, optimum protection is provided when combined with any acrylic filler.
PROTECT 360 anticorrosive epoxy primer provides excellent protection of steel surfaces, thanks to high quality resins and active anti-corrosion additives. It is used for renovation of bodies of passenger cars, as well as heavily operated lorries or buses. It gives very good adhesion to various substrates and excellent sealing properties. It may be coated with top coats, also using wet-on-wet tech nique. Protect 360 can be applied in 1+1 ratio with Hardener H 5950 (wet on wet) or in 4+1 ratio with Hardener H 5960 with additional thinner in different ratio (10, 25 and 50%). Thanks to it different thicknesses of surface can be archieved.
PROTECT 370 is a one-component, filling acryl filler. It is applied with a spray gun and in aerosol dispenser. Due to low adhesion to metals and no anticorrosion properties it is mainly applied on putties and old coatings. The main advantage of Protect 370 is short drying time (especially in aero sol), considerably shortening the repair time.
PROTECT 380 - Polyester finishing filler applied by pneumatic spraying. Once mixed with the hardener, the product gains spray viscosity without the need for extra thinners. A unique indicator allows the readiness of the mixture to be evaluated (when the olive colour turns light beige, the product is ready for spraying), and the thoroughness of the mixing of the components to be inspected.Allows a high fill ratio to be achieved leaving a smooth surface, even on very large areas. Ready to sand after approx. 2 hours at 20oC (this can be reduced by heating to a maximum of 60°C). The product is intended for machine sanding, as well as for manual sanding with fine-grained abrasive paper.
NOVAKRYL 570 - acryl clearcoat with Scratch Resistant properties. It is very easy in application, good flow and fast drying, which facilitates repair and shortens the time of car remaining in spray booth. Its hardness high gloss, UV stability and weather resistance guarantee excellent appearance and durability of the coat. NOVAKRYL 570 is compatible with all basecoats available on the market. We offer it with slow, standard and fast hardener, the choice depends on application conditions.
NOVAKRYL HS 2+1
NOVAKRYL 2+1 HS - acryl clearcoat with high contents of solid particles. Its hardness, high gloss, UV stability and weather resistance guarantee excellent appearance and durability of the coat. Only one and a half coat, good flow and fast drying ensures effortless repair and short time in spray booth. Novakryl HS is compatible with all basecoats available on the market. We offer it with slow, standard and fast hardener, the choice depends on application conditions. It can be applied on water.
Acryl Clearcoat NOVAKRYL 540 - acrylic clearcoat with Scratch Resistant properties. Characterized very fast drying properties. Recommended for small and fast repair. Operation hardness is achieved after 20 min in 60 C. It is compatible with majority of solvent basecoats and water basecoats available on the market. Clearcoat is UV and weather resistant.
NOVAKRYL 580 - colourless, acryl clearcoat with Scratch Resistant properties. It is characterised by high content of solid particles. Its hardness, high gloss, UV stability and weather resistance guarantee excellent appearance and durability of the coat. Applied in only one and a half coat, good flow and fast drying Novakryl 580 ensures effortless repair and short time of staying in spray booth. Novakryl 580 is compatible with all basecoats available on the market. We offer it with slow, standard and fast hardener, the choice depends on application conditions. It can be applied on water basecoats.
NOVAKRYL 590 - acryl clearcoat with Scratch Resistant properties. It is characterised by high content of solid particles, higher flexibility and low tendency for running down. High gloss, UV stability and weather resis tance guarantee excellent appearance and durability of the coat. Applied in only one and a half coat, good flow and fast drying Novakryl 590 ensures effortless repair and short time in spray booth. Novakryl 590 is compatible with all basecoats available in the market. We offer it with slow, normal and fast hardener, the choice is depended on application conditions. It can be applied on water base coats.
Structure Topcoat spray 500ml
Quick-drying decorative acrylic coat with very good covering properties, of a fine-grained texture imitating plastic, designed for painting wooden, metal and aluminium surfaces as well as old paint coatings and polyester laminates. The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle.
Plastic Primer spray 500ml
Quick-drying, colourless primer that increases the adhesion of acrylic primers, acrylic and polyurethane coats for different substrate types, especially plastic (including polypropylene and its mixtures). The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle.
Control Spray 500ml
The fast-drying control spray is a product aid which creates a thin control layer on surfaces intended for sanding (i.e. putties, primers). The control layer allows quickly detecting all sanding unevenness and scratches during processing, and to correct the areas which require further processing. Proper evaluation of the sanded surface preparation ensures high quality repairs. The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle.
Antigravel spray 500ml
The product forms a durable, very flexible layer that is resistant to stone impact. Protects against petrol, oil, water and salt. It also has soundabsorbing and sound-proofing properties. The product is based on synthetic resins; it contains neither asphalt nor bitumen and can be coated with any clearcoats. Ecological product with reduced solvent content.
Acrilic Primer spray 500ml
One-component, filling acrylic primer designed for levelling surfaces coated with putty and old paint coatings. Perfect for spot repairs. Very short drying time allowing for making quick repairs is the main advantage of the primer. The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle.
Clearcoat spray 500ml
One-component, thermoplastic product with very good levelling and easy to polish. Perfect for spot repairs. Available in Glossy and Matt versions. The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle.
Wheel Sprey 500ml
Quick-drying acrylic coat for renovation and repair of rims and caps made of steel and lightmetals. The coat has very good coating characteristics, durable gloss, resistance to water, petrol and atmospheric conditions. The product has the FANnozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle.
Acrylic Topcoat spray 500ml
Quick-drying acryl topcoat with very good covering properties, intended for painting wooden, metal and aluminium surfaces as well as old varnish coats and polyester laminates. The product has the FANnozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle.
Cavity Wax spray 500ml
Wax-based preservative for anti-corrosion protection of closed sections in the car body. Resistant to atmospheric factors and to weak acids and bases. It has good penetration (reaches inside sections) and gives a tight layer which protects against water and salt. The kit includes an adapter for directly applying the preservative into closed sections through their process openings.
Paint Remover spray 500ml
The product is intended for removing the majority of paint types and other coatings from various surfaces (e.g. metal, stone, wood, glass, asphalt or concrete). It acts by effectively and quickly penetrating the coating and weakening its bonding to the substrate to enable easy removal.
NOVOL FOAM FOR RECESSES
Polyurethane foam for filling car recesses between the doors, engine and booth cover etc. It adjusts easily to profiles due to which it can be used in all types of vehicles. It shortens the time and improves the quality of the work performed by securing door seals and levelling a sharp coat boundary.
Used mainly in automotive industry for mounting battens, logos, etc. Resistant to atmospheric conditions, salt, water, UV radiation and temperature from -40 C to +90 C. Used also as a very strong universal tape, for instance, when attaching posters, hooks, racks, decorative profiles etc.
VELCRO POLISHING SPONGE
Polishing sponges are used for polishing and sanding varnish coats of various types. An impressive polishing effect is achieved by the high quality of material the sponge is made of. The foam structure allows keeping water inside, which accelerates the absorption of heat from the polished surface. Depending on the operation being performed, it is possible to select a sponge of an appropriate hardness (hard, medium and very soft). Polishing sponges can be used together with pneumatic or electric driven polishing machines. They enable both dry andwet sanding within the speed range of 600 to 2000 rpm at most without loading.
Available with three types of threads: M14, M16 and with a sticker.
PAINT STRAINER - NYLON
Disposable paper sieve with a nylon insert used for removing mechanical contamination from paints and coats before painting.
The product is perfect for polishing and removing stains from polishing compounds and finishing glazes. The micro-active fibres retain small and large dirt particles without scratching the surface. For dry and wet wiping. Durable. Can be repeatedly machine washed at temperatures up to +60°C.
Universal masking paper, smoothened, biodegradable.
Available in dimensions : 60 cm x 280m i 90 cm x 280m